Curtain Track System

Industrial Curtains

Where do I start?

Step 1
Please identify the exact area you wish to enclose with industrial Curtains.

Step 2
Figure the required height of the vinyl curtains. Should there be more than one height dimension - calculate the linear feet of each dimension separately, if possible.

Step 3
Figure the total linear feet required taking into account curved sections and please add approximately 10% for gathering or desired overlap.

Step 4
Review the available mounting systems, please keep in mind there should be a support member for every five feet of track, closer together if possible for insulated Curtains.

Step 5
Identify which mounting system will work best for your physical situation. Should you encounter difficulty with any of these specifications, please call us - we will be glad to help you.

Choose from 5 different Mounting Systems

	Chain or Beam Type Mount Works well when attached to a support member immediately above the top of the curtain.		Threaded Rod Type Mount Works well when the attachment points are substantially higher than the top of the curtain.
	Ceiling Type Mounting Mounts directly to ceiling or any flat horizontal surface - must be directly above the curtain.		Wall Type Mounting Mounts directly to any vertical surface.
		Beam or Truss Mounting Attaches directly to I Beams or roof trusses. The clamps are secured with set screws and rotate for proper orientation.
Track Sections
	Curved Track Section Curved Track with regular Connectors		Galvanized 16 gauge Track Various lengths between 2' and 20' long available, is easily cut to custom lengths.
		Regular Connector
End Fittings for Track
	Wall Mount Fitting with bracket Down

	Regular End Fitting		Adjustable end Fitting
Chain or Beam Type Mounts

Chain or Beam Type Mounts Is best used on support members directly above the top of the curtain.	Support every 5 feet recommended
		To support a curve or a long run of Track
Threaded Rod Type Mounts

Threaded Rod Type Mount To be used when attachment points are substantially above the top of the curtain.	Support every 5 feet recommended
		To support a curved or a long run of Track
Ceiling Type Mounting

Mounts directly to Ceiling - must be immediately above Curtain	Support every 5 feet recommended

Wall Type Mounting
	Wall mount Connectors with Bracket: Up or Down

Attaches to Vertical Walls	Wall mount Support with Bracket Up or Down

	Support every 5 feet recommended
Beam or Truss Mounting

Can be mounted to Roof Truss sections, beams and channels. Affixed with edge clamps and set screws. Clamps can be rotated for proper orientation.	Support every 5 feet recommended
Curtain Trolleys

Nylon Roller

With 1/2" Hook	With 1" Hook
Steel Ball Bearing Roller

With 1/2" Hook	with 1" Hook

Edge Clamp	4" Pull Rope TRolly Steel Wheels	Overlap Trolley Steel Wheels